Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #12

Edição por Jeff Suovanen

Edição aprovada por Jeff Suovanen

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Carefully remove the joystick from its housing.
[* icon_note] There is a thin black gasket around the hole where the joystick pokes through the Joy-Con. Do your best not to disturb this gasket as you remove the joystick!
[* icon_reminder] Once the Joy-Con is fully reassembled, connect it to your Nintendo Switch and [https://en-americas-support.nintendo.com/app/answers/detail/a_id/22340/~/how-to-calibrate-the-controllers#DT:t1-q1a1EP:t1-q1a1-c|calibrate the new joystick|new_window=true]. Additionally, you may need to power cycle your Switch by holding down the power button for 10-15 seconds until it turns off, then turning it back on.
[* icon_reminder] Once the Joy-Con is fully reassembled, connect it to your Nintendo Switch and [https://en-americas-support.nintendo.com/app/answers/detail/a_id/22340/~/how-to-calibrate-the-controllers#DT:t1-q1a1EP:t1-q1a1-c|calibrate the new joystick|new_window=true]. Additionally, you may need to power cycle your Switch by holding down the power button for 10-15 seconds until it turns off, then turning it back on.