Alterações no passo nº 10
Edição por Taylor Dixon —
Edição aprovada por Taylor Dixon
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] The Joystick ribbon flex cable is locked into place by a ZIF connector. This lock is located on the ''opposite'' side from where the cable is inserted. ***Use a Spudger to carefully flip the ZIF connector lock upward.*** |
|---|---|
| - | [* black] ***Use Tweezers to gently pull the Joystick ribbon flex cable out of the ZIF connector socket.*** |
| + | [* black] Finally, the Joystick is locked into place by one last ZIF connector. Use a Spudger to carefully flip the ZIF lock upward and disconnect the cable. |