Alterações no passo nº 2
Edição por Taylor Dixon —
Edição aprovada por Taylor Dixon
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Insert an Opening Pick into the bottom edge of the back panel (opposite the L and ZL buttons). | |
| - | [* black] Slowly slide the Opening Pick |
| + | [* black] Slowly slide the flat edge of your Opening Pick up the side of the Joy-Con. |
| [* icon_note] Be careful not to slide the Opening Pick too far inside the Joy-Con. This may damage the inner components. The back panel loosens fairly easily, so not much pressure is needed. |