Alterações no passo nº 7
Edição por Jeff Suovanen —
Edição aprovada por Jeff Suovanen
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] While opening the display at a 45° angle (to not put too much stress on the display cables) peel the adhesive off the display and the force touch gasket with a pair of tweezers. |
|---|---|
| - | [* black] Thread the adhesive around and behind the display cables to get it off completely and press the gasket down to make it re-adhere to the case. |
| - | [* icon_note] If the force touch gasket itself comes off the case too and it won't stick back down again you probably want to have two pieces of adhesives ready for reassembling the watch—one for underneath the gasket and one for between the gasket and the display. |
| + | [* icon_caution] To avoid straining the display cables, don't open the display all the way yet. |
| + | [* black] Open the display to about a 45° angle, and use tweezers to peel off the adhesive between the display and the Force Touch gasket. |
| + | [* black] Thread the adhesive around and behind the display cables to get it off completely, and press the gasket down to re-adhere to the case. |
| + | [* icon_reminder] If the Force Touch gasket itself comes loose and won't stick back down, you should replace both the adhesive underneath the gasket and between the gasket and the display. |