Alterações no passo nº 6
Edição por Jeff Suovanen —
Edição aprovada por Jeff Suovanen
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Insert wisdom here. |
|---|---|
| + | [* black] The power supply connects to the logic board by way of not one, not two, but four shiny terminals secured with Torx screws. |
| + | [* icon_note] This design is much closer to [guide|21212|what we saw on the 2013 Mac Pro|stepid=57093|new_window=true] than what we're used to [guide|30530|ripping out of the iMac 5K|new_window=true]. |
| + | [* black] It also makes accessing logic board components (apart from the RAM of course) much, much easier. With the power supply tucked back into the rear shell, we can remove the board right away. Let's do that! |