|
Introduction |
Use this guide to apply adhesive and seal the rear glass (aka back panel or back panelcover) on your iPhone 14, 14 Plus, and all four of the iPhone 15 variants. | | | This procedure works for the following iPhones: | | | * iPhone 14 and 14 Plus | | * All iPhone 15 phones | | * All iPhone 16 phones | | Replace your adhesive to maintain your iPhone's water and dust resistance after a repair or after the existing seal has worn out. Note that your iPhone's water resistance depends on how well you apply its adhesive. | | | ***Note***: If you're replacing the back glass adhesive on an iPhone 15 Pro or Pro Max, you won't see any of the internal components as pictured in this guide, but the procedure is the same. | | | ***Before starting this guide***, make sure you've completed your repair and have reassembled your iPhone up until the rear glass. Return to your repair guide and do so if you haven't already. |
|