Histórico da introdução: iPad Pro 11" 3rd Gen Logic Board Replacement

Dispositivo	iPad Pro 11" 3rd Gen
Type	replacement
Thing	Logic Board
Title	iPad Pro 11" 3rd Gen Logic Board Replacement
Introduction	Follow this guide to replace the Logic Board in your iPad Pro 11" 3rd-gen. This guide is written with an ***A2301*** (cellular + mmWave) model iPad Pro. If your iPad is not this model, there will be some minor visual discrepancies and extra steps. Because there are steps in this guide where the battery may remain connected to the logic board, leave the iPad on until the battery is ***completely discharged*** (the iPad turns itself off) before attempting this guide.
Time Required Min	1 hora
Time Required Max	2 horas
Imageid	Antes Depois
Difficulty	Difficult
Conclusion	Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing. ***To reassemble your device, follow these instructions in reverse order.*** Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]]. Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [link|https://www.ifixit.com/Answers/Device/iPad%20Pro%2011"%203rd%20Gen|iPad Pro 11" 3rd Gen Answers community] for help.
Author	Chayton Ritter
Public	Não

Pré-requisitos de guia

• Nº 1 era empty, mas agora é iPad Pro 11" 3rd Gen SIM Card Tray Replacement.
• Nº 2 era empty, mas agora é Battery Blocking.
• Nº 3 era empty, mas agora é iPad Pro 11" 3rd Gen Screen Replacement.
• Nº 4 era empty, mas agora é iPad Pro 11" 3rd Gen USB-C Port Replacement.
• Nº 5 era empty, mas agora é Top Cable Shield Removal.
• Nº 6 era empty, mas agora é iPad Pro 11" 3rd Gen Front Camera Assembly Replacement.
• Nº 7 era empty, mas agora é iPad Pro 11" 3rd Gen Rear Camera Replacement.

Ferramentas

Sinalizadores

Passos