Pular para o conteúdo principal
  1. To remove the lens, three T15 x 12.5mm screws must be removed by a T15 head screwdriver. The location of the other two screws are marked in red.
    • To remove the lens, three T15 x 12.5mm screws must be removed by a T15 head screwdriver.

    • The location of the other two screws are marked in red.

  2. After the lens has been removed the back cover needs to be removed. There are no snaps or screws holding it in place. After the lens has been removed the back cover needs to be removed. There are no snaps or screws holding it in place.
    • After the lens has been removed the back cover needs to be removed. There are no snaps or screws holding it in place.

  3. Kit de Reparo de Bateria do MacBook

    A partir de $69.99

    Buy Now

    Kit de Reparo de Bateria do MacBook

    A partir de $69.99

    Buy Now
  4. Desolder the yellow and black wires that connect the solar panel to the circuit board. Remove the solar panel by pressing on the mounting clips (underneath fingers) using the spudger.
    • Desolder the yellow and black wires that connect the solar panel to the circuit board.

    • Remove the solar panel by pressing on the mounting clips (underneath fingers) using the spudger.

  5. Solder the wires to the solar panel (positive to positive, negative to negative). Solder the wires to the solar panel (positive to positive, negative to negative).
    • Solder the wires to the solar panel (positive to positive, negative to negative).

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Jeremiah Rhoades

Membro desde: 07-11-2017

365 reputação

3 Guias de autoria

Equipe

IUPUI, Team S2-G3, Harley Fall 2017 Membro de IUPUI, Team S2-G3, Harley Fall 2017

IUPUI-HARLEY-F17S2G3

3 Membros

3 Guias de autoria

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 4

Todo: 124