Introdução
Before removing and replacing the sensor of Zoomer Dino Boomer, check the Troubleshooting Page to make sure the issue with gesture mode cannot be fixed without removing the sensor.
O que você precisa
-
-
Unscrew the two 7.5 mm Phillips #0 screws at the base of the neck.
-
Remove the two 7.2 mm Phillips #0 screws above these at the base of the mouth.
-
-
Quase terminado!
To reassemble your device, follow these instructions in reverse order.
Conclusão
To reassemble your device, follow these instructions in reverse order.