Ir para o conteúdo principal

Zoom H1 Handy Recorder Speaker Replacement

O que você precisa

  1. Zoom H1 Handy Recorder Speaker Replacement, Speaker: passo 1, imagem 1 %32
    • Turn the device over with its display down.

  2. Zoom H1 Handy Recorder Speaker Replacement: passo 2, imagem 1 %32
    • Remove the battery cover, pressing down on the tabs and sliding.

  3. Zoom H1 Handy Recorder Speaker Replacement: passo 3, imagem 1 %32
    • Unscrew the two (2) #00, 10 mm screws located below the mic on the back cover.

  4. Zoom H1 Handy Recorder Speaker Replacement: passo 4, imagem 1 %32
    • Carefully pry up the top end of the back cover using one finger.

  5. Zoom H1 Handy Recorder Speaker Replacement: passo 5, imagem 1 %32
    • Remove the back plate by using a plastic removal tool to pry the back cover up around the edges.

  6. Zoom H1 Handy Recorder Speaker Replacement: passo 6, imagem 1 %32
    • De-solder the white and black speaker wires from their soldering points.

    • Speaker soldering points are located on the thin section of the blue circuit board, and are marked with “SP+” and “SP-”.

    • Keep in mind which color wire was connected at which terminal.

  7. Zoom H1 Handy Recorder Speaker Replacement: passo 7, imagem 1 %32
    • Remove the damaged speaker from its place at the very bottom of the case, just below the battery input.

    • You will have to break the glue holding the speaker in place before removing it.

  8. Zoom H1 Handy Recorder Speaker Replacement: passo 8, imagem 1 %32
    • Replace the damaged speaker and re-solder to the original solder points.

    • Ensure that the negative wire is soldered to the “SP-” while the positive wire is soldered to the “SP+” point.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Alex

Membro desde: 10/28/13

809 Reputação

Autoria de 5 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 2

Últimos 30 dias: 15

Duração total: 1,626