Perigo
Potencialmente perigoso
Se este procedimento não for seguido corretamente, podem ocorrer ferimentos. Use cautela e siga todos os avisos.
Perigo

Introdução

This guide shows how to disassemble and replace the battery within the device.

  1. Power off the device and keep it unplugged.
    • Power off the device and keep it unplugged.

    • Open the case using a plastic opening tool around the edges. Slightly pull the cover.

    • Do not completely remove back casing because there is a speaker attached to the back.

    Adicionar comentário

  2. Cut the power cables connecting between the screen and the motherboard. There should be a red and black cable each. Try to cut in the center of the two wires to solder after you replace it.
    • Cut the power cables connecting between the screen and the motherboard. There should be a red and black cable each. Try to cut in the center of the two wires to solder after you replace it.

    • Try to separate the wires away from the other wires on the motherboard. This way you will not cut any additional wiring.

    Adicionar comentário

    • Peel off the battery from the metal casing for the LED screen. The battery will be held down with an adhesive, and it will not take much pressure to be released.

    • There will be additional wiring hooked up to the motherboard. Make sure not to tangle up or damage any wiring close by.

    • Do not place much pressure onto the LED screen while peeling off the battery.

    Adicionar comentário

    • After creating space to work, warm up a soldering iron.

    • Apply heat onto the solder over the corresponding cut wire to the new battery wire.

    • Once the solder melts and forms a bridge between the two wires, try to turn on the device then check for power.

    • Como soldar e dessoldar contatos

    • Keep the soldering iron away from the battery, motherboard, and any other wires. Do not let children around the soldering station.

    Adicionar comentário

Conclusão

To reassemble your device, follow the initial instructions in reverse order.

Jacob

Member since: 26-03-2018

121 reputação

Autoria de 1 guia

Equipe

IUPUI, Team S2-G1, Harley Spring 2018 Membro de IUPUI, Team S2-G1, Harley Spring 2018

IUPUI-HARLEY-S18S2G1

3 Membros

4 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 5

Todo: 124