Introdução

The guide instructs you to replace the spring clip or (also known as the arm clip) at the arm attachment on the Yuneec Typhoon H.

The spring clips usually get broken during a crash.

Peças

Não são necessárias peças.

Using a JIS #00 screwdriver, unscrew the 3mm oval screw. The oval screw is hard to remove once fully unscrewed, to remove the screw flip the drone upside down to have the screw fall out. The oval screw is hard to remove once fully unscrewed, to remove the screw flip the drone upside down to have the screw fall out.
  • Using a JIS #00 screwdriver, unscrew the 3mm oval screw.

    • The oval screw is hard to remove once fully unscrewed, to remove the screw flip the drone upside down to have the screw fall out.

Adicionar comentário

For this step the arm must be bent. Remove the broken arm clip by pinching the metal top and then pull it out with an upward force.
  • For this step the arm must be bent.

  • Remove the broken arm clip by pinching the metal top and then pull it out with an upward force.

    • The Blunt Nose Tweezers may be helpful in removing the arm clip.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Claire Luce

Member since: 16-04-2018

323 reputação

2 Guides authored

Equipe

Cal Poly, Team S22-G3, Maness Spring 2018 Membro de Cal Poly, Team S22-G3, Maness Spring 2018

CPSU-MANESS-S18S22G3

4 Membros

5 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 10

Últimos 30 dias: 27

Todo: 58