Conserte seus objetos Comunidade Loja

Xbox Series X|S Controller (Model 1914) Left Handle Cover Replacement

Introdução

Use this guide to replace the left handle cover on your Xbox Series X|S Controller (model 1914).

O que você precisa

  1. Xbox Series X|S Controller (Model 1914) Left Handle Cover Replacement, Insert an opening tool: passo 1, imagem 1 %32 Xbox Series X|S Controller (Model 1914) Left Handle Cover Replacement, Insert an opening tool: passo 1, imagem 2 %32 Xbox Series X|S Controller (Model 1914) Left Handle Cover Replacement, Insert an opening tool: passo 1, imagem 3 %32

    • Insert an opening tool between the left handle cover and the bottom inner edge of the back housing.

    Editar

  3. Xbox Series X|S Controller (Model 1914) Left Handle Cover Replacement, Release the left handle cover clips: passo 2, imagem 1 %32 Xbox Series X|S Controller (Model 1914) Left Handle Cover Replacement, Release the left handle cover clips: passo 2, imagem 2 %32 Xbox Series X|S Controller (Model 1914) Left Handle Cover Replacement, Release the left handle cover clips: passo 2, imagem 3 %32

    • Strong plastic clips secure the handle cover. Significant force is required to release them.

    • Slide the opening tool along the inner edge of the left handle cover and pry intermittently to release the plastic clips.

    Editar

  4. Xbox Series X|S Controller (Model 1914) Left Handle Cover Replacement, Remove the left handle cover: passo 3, imagem 1 %32 Xbox Series X|S Controller (Model 1914) Left Handle Cover Replacement, Remove the left handle cover: passo 3, imagem 2 %32 Xbox Series X|S Controller (Model 1914) Left Handle Cover Replacement, Remove the left handle cover: passo 3, imagem 3 %32

    • The plastic clips on the outer edge make it difficult to slide along it and release the clips. Therefore, prying up on the inner edge is the easier option.

    • Pry up the middle inner edge of the handle cover with the opening tool to release the remaining clips.

    • Place a finger on top of the handle cover to prevent it from being forcefully ejected.

    • Remove the left handle cover.

    • To reinstall the left handle cover, position it on the back housing and press down firmly along the edges to engage all of the clips.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.

Uma outra pessoa concluiu este guia.

Autor(a)

com 1 outro contribuidor

Manuel Haeussermann

Membro desde: 07/13/22

15.592 Reputação

Autoria de 71 guias

Emblemas: 32

+29 outros emblemas

Equipe

iFixit Membro de iFixit

Staff

Membros da 135

Autoria de 17.288 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 3

Últimos 7 dias: 16

Últimos 30 dias: 98

Duração total: 1,171