Conserte seus objetos Comunidade Loja

Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement

Introdução

Follow this guide to remove the drive belt for the Wacker Compactor Plate VP1550AW 2014.

O que você precisa

  1. Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement, Safety precautions: passo 1, imagem 1 %32 Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement, Safety precautions: passo 1, imagem 2 %32

    • Before you begin, be sure that the engine is powered off and is cool to the touch.

    • Grab the plastic housing at the end of the spark plug wire.

    • Pull firmly to disconnect the wire from the spark plug.

    Editar

  2. Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement, Loosen the belt guard: passo 2, imagem 1 %32

    • Use a 1/2" socket and wrench to loosen the two bolts securing the belt guard.

    • The bolts are captive and should not be removed.

    Editar

  4. Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement, Remove the belt guard: passo 3, imagem 1 %32 Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement, Remove the belt guard: passo 3, imagem 2 %32

    • Remove the belt guard.

    Editar

  5. Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement, Remove the drive belt: passo 4, imagem 1 %32 Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement, Remove the drive belt: passo 4, imagem 2 %32 Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement, Remove the drive belt: passo 4, imagem 3 %32

    • Use scissors or a blade to cut the drive belt.

    • Remove the drive belt.

    Editar

  6. Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement, Install a replacement belt: passo 5, imagem 1 %32

    • Loop the replacement belt onto the small pulley.

    Editar

  7. Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement: passo 6, imagem 1 %32 Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement: passo 6, imagem 2 %32 Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement: passo 6, imagem 3 %32

    • Replacing the belt poses a substantial pinching hazard. Wear safety gloves and be mindful where you position your fingers.

    • Guide the belt over the top of the clutch pulley.

    • Loop the belt underneath the pulley axle.

    • Rotate the pulley slowly and guide the built into the groove.

    • Getting the replacement belt back onto the drive pulley requires considerable strength.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 1 outro contribuidor

Arthur Shi

Membro desde: 01/03/18

254.546 Reputação

Autoria de 529 guias

Emblemas: 47

+44 outros emblemas

Equipe

iFixit Membro de iFixit

Staff

Membros da 136

Autoria de 17.410 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 11

Últimos 30 dias: 35

Duração total: 3,027