O que você precisa
-
-
Turn your device to where the back panel is facing you.
Pergunte ao FixBot
-
-
-
Lift the Leg all the way up and twist the bottom to remove.
-
Once the bottom part pops out the whole leg should just come off.
-
Remove any game cartridge from the device.
-
-
-
-
Remove all of the plastic tabs on the device. These are covering screws that will need to be removed.
-
There is a special tab in the cartridge cover that is made of rubber, make sure to not break this tab.
-
-
-
Remove all nine screws from the back of the device using a J0 bit.
-
Remove the small battery.
-
-
-
Using a plastic opening tool, detach the backplate from the front piece.
-
Once the backplate has been removed, you will have access to the circuit board.
-
To reassemble your device, follow these instructions in reverse order.
Cancelar: não concluí este guia.
Uma outra pessoa concluiu este guia.
Equipe
USF Tampa, Team 5-1, Lacy Fall 2016 Membro de USF Tampa, Team 5-1, Lacy Fall 2016
USFT-LACY-F16S5G1
4 Membros
Autoria de 12 guias
