Ir para o conteúdo principal

Uniden UTAB71 Battery Replacement

O que você precisa

  1. Uniden UTAB71 Battery Replacement, Battery: passo 1, imagem 1 %32 Uniden UTAB71 Battery Replacement, Battery: passo 1, imagem 2 %32
    • Use a plastic opening tool to undo the clips that attach the two halves of the tablet.

    • Be gentle with the pry tool and work your way around the edges of the tablet slowly.

    • Make sure the tablet is powered off before prying open.

    • There are two power ribbons connecting the screen to the back of the tablet. Make sure not to put too much stress on them.

  2. Uniden UTAB71 Battery Replacement: passo 2, imagem 1 %32
    • Lift off the tape that holds the speaker wires to the battery

    • Leave the tape off to the side

  3. Uniden UTAB71 Battery Replacement: passo 3, imagem 1 %32
    • Use a soldering tool to disconnect the two wires (red and black) that connect the battery to the motherboard

    • Note the placement of each colored wire in the motherboard

    • If you have no experience in soldering, please follow this guide

  4. Uniden UTAB71 Battery Replacement: passo 4, imagem 1 %32 Uniden UTAB71 Battery Replacement: passo 4, imagem 2 %32
    Ferramenta utilizada nesse passo:
    iOpener
    $12.99
    Comprar
    • Use a credit card to lift the battery off the back of the tablet

    • Do not put any pressure on the motherboard or any other internal components.

    • The battery attached to the back panel with adhesive. You may need to use a heated iOpener to loosen the adhesive and remove the battery.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Ryan Jewell

Membro desde: 10/20/16

422 Reputação

Autoria de 4 guias

Equipe

UMass Dartmouth, Team 5-4, Martin Fall 2016 Membro de UMass Dartmouth, Team 5-4, Martin Fall 2016

UMASSD-MARTIN-F16S5G4

Membros da 3

Autoria de 8 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 2

Duração total: 339