Introdução

Follow this guide to properly replace the keyboard.

Push the highlighted button in the direction in which the antenna is pointing. The battery will release and pop up.
  • Push the highlighted button in the direction in which the antenna is pointing. The battery will release and pop up.

Adicionar comentário

Remove the battery.
  • Remove the battery.

Adicionar comentário

Identify the antenna. It is the extendable plastic component pictured here.
  • Identify the antenna. It is the extendable plastic component pictured here.

Adicionar comentário

Twist the base in a counter-clockwise motion to unscrew the antenna.
  • Twist the base in a counter-clockwise motion to unscrew the antenna.

Adicionar comentário

The antenna should slide right out of the phone when finished. The antenna should slide right out of the phone when finished.
  • The antenna should slide right out of the phone when finished.

Adicionar comentário

Remove the small rubber grommet using a plastic opening tool as shown.
  • Remove the small rubber grommet using a plastic opening tool as shown.

Adicionar comentário

Unscrew all five of the highlighted screws using a Phillips #00 Screwdriver.
  • Unscrew all five of the highlighted screws using a Phillips #00 Screwdriver.

Adicionar comentário

Use a plastic opening tool to separate the two pieces that form the outer case of the phone.
  • Use a plastic opening tool to separate the two pieces that form the outer case of the phone.

  • Caution: prying the two pieces apart may be difficult.

Adicionar comentário

Remove the posterior piece of the outer case.
  • Remove the posterior piece of the outer case.

Adicionar comentário

Remove the speaker using a plastic opening tool.
  • Remove the speaker using a plastic opening tool.

Adicionar comentário

Remove the wire attached to the speaker from the logic board using tweezers. Remove the wire attached to the speaker from the logic board using tweezers.
  • Remove the wire attached to the speaker from the logic board using tweezers.

Adicionar comentário

Detach the highlighted piece from the logic board using a plastic opening tool.
  • Detach the highlighted piece from the logic board using a plastic opening tool.

Adicionar comentário

Remove the logic board from the anterior piece of the outer case using the plastic opening tool. Remove the logic board from the anterior piece of the outer case using the plastic opening tool.
  • Remove the logic board from the anterior piece of the outer case using the plastic opening tool.

Adicionar comentário

Remove the keyboard.
  • Remove the keyboard.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Bryon Hazlewood

Member since: 03-10-2012

1 reputação

2 Guides authored

Equipe

Cal Poly, Team 24-26, Regan Fall 2012 Membro de Cal Poly, Team 24-26, Regan Fall 2012

CPSU-REGAN-F12S24G26

4 Membros

5 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Todo: 261