Turtle Beach Recon 70P Motherboard Replacement

Introdução

The motherboard is the central component of your headset that ensures that the device is functioning. Any problems with the motherboard may cause the headset to stop working in its entirety, therefore, in any case that your motherboard has suffered any damage, this guide will take you step by step on how to replace it and get your gaming headset working again.

O que você precisa

Passo 1 Motherboard

Turtle Beach Recon 70P Motherboard Replacement, Motherboard: passo 1, imagem 1 %32

Turtle Beach Recon 70P Motherboard Replacement, Motherboard: passo 1, imagem 2 %32

Turtle Beach Recon 70P Motherboard Replacement, Motherboard: passo 1, imagem 3 %32

Remove the left ear pad by following the steps from the ear pad replacement guide.
Use a spudger to pry up and remove the black plastic cover.

Editar

Passo 2

Turtle Beach Recon 70P Motherboard Replacement: passo 2, imagem 3 %32

Use a Phillips screwdriver to remove the two 5 mm screws that secure the motherboard.

Editar

Passo 3

Turtle Beach Recon 70P Motherboard Replacement: passo 3, imagem 3 %32

You may need to move the speaker so it does not block the path of the motherboard.
Remove the motherboard from the headset by up and away from the volume wheel.
Take care not to strain the connections.

Editar

Passo 4

Before replacing the motherboard, use flush cutters to cut each wire connected to the motherboard.
Cut the wires as close as possible to their connections.
Take note of how each component connects to the motherboard.

Editar

Passo 5

Prepare your replacement motherboard before continuing.
Solder each wire of the new motherboard in the same spots they were originally found.
Soldering irons can cause burns, fires and device damage. Always solder in a well-ventilated area.