Conserte seus objetos Comunidade Loja

Turtle Beach Ear Force XO Four Microphone Replacement

Introdução

This guide will exhibit how to replace the microphone board. Soldering is required to detach and replace the board, so refer to the soldering replacement guide for more information.

O que você precisa

  1. Turtle Beach Ear Force XO Four Microphone Replacement, Microphone: passo 1, imagem 1 %32 Turtle Beach Ear Force XO Four Microphone Replacement, Microphone: passo 1, imagem 2 %32 Turtle Beach Ear Force XO Four Microphone Replacement, Microphone: passo 1, imagem 3 %32

    • Gently remove the foam pad from the microphone by pulling it apart.

    Editar

  3. Turtle Beach Ear Force XO Four Microphone Replacement: passo 2, imagem 1 %32

    • Remove the PH0 7.1 mm screw from the back casing.

    Editar

  4. Turtle Beach Ear Force XO Four Microphone Replacement: passo 3, imagem 1 %32 Turtle Beach Ear Force XO Four Microphone Replacement: passo 3, imagem 2 %32

    • Remove the back casing from the microphone.

    • Desolder the two wires from the back of the microphone. For instructions on soldering, please see iFixit's soldering guide.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

7 outras pessoas executaram este guia.

Autor(a)

com 3 outros contribuidores

Cody Barrett

Membro desde: 09/22/15

453 Reputação

Autoria de 2 guias

Emblemas: 10

+7 outros emblemas

Equipe

Baylor, Team 10-14, Williams Fall 2015 Membro de Baylor, Team 10-14, Williams Fall 2015

BU-WILLIAMS-F15S10G14

Membros da 3

Autoria de 8 guias

Um comentário

I have a turtle beach recon 200 and there is no category here for it. I have gotten water into my microphone and I do not know how to fix it. My mic is attached to the headset. I have tried blowing into it and wiping it. None of that works. Please help.

Jacob Krantz - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 4

Últimos 30 dias: 8

Duração total: 8,927