Ir para o conteúdo principal

Toro Cement Mixer 68009HD 2018 Tub Replacement

O que você precisa

  1. Toro Cement Mixer 68009HD 2018 Tub Replacement, Safety precautions: passo 1, imagem 1 %32 Toro Cement Mixer 68009HD 2018 Tub Replacement, Safety precautions: passo 1, imagem 2 %32
    • Before you begin, press the engine-stop switch to turn off the engine.

  2. Toro Cement Mixer 68009HD 2018 Tub Replacement: passo 2, imagem 1 %32 Toro Cement Mixer 68009HD 2018 Tub Replacement: passo 2, imagem 2 %32 Toro Cement Mixer 68009HD 2018 Tub Replacement: passo 2, imagem 3 %32
    • Unlatch the three rubber straps securing the cowl.

  3. Toro Cement Mixer 68009HD 2018 Tub Replacement: passo 3, imagem 1 %32 Toro Cement Mixer 68009HD 2018 Tub Replacement: passo 3, imagem 2 %32 Toro Cement Mixer 68009HD 2018 Tub Replacement: passo 3, imagem 3 %32
    • Swing the cowl up until it rests securely on the frame.

  4. Toro Cement Mixer 68009HD 2018 Tub Replacement: passo 4, imagem 1 %32 Toro Cement Mixer 68009HD 2018 Tub Replacement: passo 4, imagem 2 %32
    • Slide the fuel cutoff lever to the left to cut the fuel supply to the engine.

  5. Toro Cement Mixer 68009HD 2018 Tub Replacement: passo 5, imagem 1 %32 Toro Cement Mixer 68009HD 2018 Tub Replacement: passo 5, imagem 2 %32
    • Grab the plastic housing at the end of the spark plug wire.

    • Pull firmly to disconnect the wire from the spark plug.

  6. Toro Cement Mixer 68009HD 2018 Tub Replacement, Remove the tub: passo 6, imagem 1 %32 Toro Cement Mixer 68009HD 2018 Tub Replacement, Remove the tub: passo 6, imagem 2 %32
    • Pull up on the brake lever to disengage the brake.

  7. Toro Cement Mixer 68009HD 2018 Tub Replacement: passo 7, imagem 1 %32 Toro Cement Mixer 68009HD 2018 Tub Replacement: passo 7, imagem 2 %32 Toro Cement Mixer 68009HD 2018 Tub Replacement: passo 7, imagem 3 %32
    • Rotate the tub until the yoke and dish assembly sit directly below the tub.

  8. Toro Cement Mixer 68009HD 2018 Tub Replacement: passo 8, imagem 1 %32 Toro Cement Mixer 68009HD 2018 Tub Replacement: passo 8, imagem 2 %32
    • Push down on the brake lever to re-engage the brake.

    • Make sure that the brake is fully engaged.

  9. Toro Cement Mixer 68009HD 2018 Tub Replacement: passo 9, imagem 1 %32 Toro Cement Mixer 68009HD 2018 Tub Replacement: passo 9, imagem 2 %32 Toro Cement Mixer 68009HD 2018 Tub Replacement: passo 9, imagem 3 %32
    • Use a 3/4 inch socket to remove the six nuts securing the tub to the dish.

  10. Toro Cement Mixer 68009HD 2018 Tub Replacement: passo 10, imagem 1 %32
    • Remove the six drum clamp plates from the tub mounting points.

  11. Toro Cement Mixer 68009HD 2018 Tub Replacement: passo 11, imagem 1 %32
    • Lift the tub up slightly by the gear ring to loosen the tub from the dish.

  12. Toro Cement Mixer 68009HD 2018 Tub Replacement: passo 12, imagem 1 %32 Toro Cement Mixer 68009HD 2018 Tub Replacement: passo 12, imagem 2 %32 Toro Cement Mixer 68009HD 2018 Tub Replacement: passo 12, imagem 3 %32
    • The tub is extremely heavy and requires at least two people to lift it. Be sure to practice safe lifting techniques.

    • Lift the tub straight up from the dish and remove it from the device.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Arthur Shi

Membro desde: 01/03/18

246.600 Reputação

Autoria de 503 guias

Equipe

iFixit Membro de iFixit

Staff

Membros da 135

Autoria de 16.117 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 2

Duração total: 225