Ir para o conteúdo principal

Top Removal

O que você precisa

  1. Top Removal, The Ninja Master Prep QB900B: passo 1, imagem 1 %32
    • Place the blender to the side.

  2. Top Removal: passo 2, imagem 1 %32 Top Removal: passo 2, imagem 2 %32
    • Remove the two highlighted screws with a Phillips #2 Screw Driver

    • Gently pull off the top.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Kamal Taha

Membro desde: 08/27/15

679 Reputação

Autoria de 5 guias

Equipe

USF Tampa, Team 1-3, Sullivan Fall 2015 Membro de USF Tampa, Team 1-3, Sullivan Fall 2015

USFT-SULLIVAN-F15S1G3

Membros da 3

Autoria de 5 guias

Um comentário

My unit has something other than Phillips screws holding the top together. It appears to be an Allen head, not a torx, closest fit was a 2mm Allen wrench but that was still too small. What head could this be?

Keith Johnson - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 8

Duração total: 2,980