/
Minha bancada de trabalho

Obtenha acesso rápido a guias, peças e respostas para seus dispositivos

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Cadastre-se
Login
Junte-se à maior comunidade de reparos do mundo
Toilet Paper Holder Replacement

Toilet Paper Holder Replacement

Elizabeth Opheim

Elizabeth Opheim e 5 outros colaboradores

Última atualização em April 24, 2020

Nenhuma estimativa
Moderada
Precisa de melhores imagens

Introdução

Vá para o passo 1

Over time, the screws and brackets securing a toilet paper holder can loosen or become disconnected entirely. This guide will walk you through the steps of replacing a broken or loose toilet paper holder.

O que você precisa

Peças

Ferramentas

Exibir mais…

A iFixit ganha comissão quando você compra por estes links.

  1. Toilet Paper Holder Replacement, Toilet Paper Holder: passo 1, imagem 1 %32 Toilet Paper Holder Replacement, Toilet Paper Holder: passo 1, imagem 2 %32 Toilet Paper Holder Replacement, Toilet Paper Holder: passo 1, imagem 3 %32

    • Unscrew the four screws of the original broken holder.

    • You may want to wear gloves.

    • If there is damage to the wall behind the old holder, check out the iFixit guide for repairing a hole in drywall.

    Editar

  2. Toilet Paper Holder Replacement: passo 2, imagem 1 %32 Toilet Paper Holder Replacement: passo 2, imagem 2 %32 Toilet Paper Holder Replacement: passo 2, imagem 3 %32

    • Measuring the area where you want your new holder to go, mark two lines 6.8" apart.

    • Measure an inch and a third (1 and 1/3") above the marks and mark these new spots where your screws will go.

    • While marking where you want to place the new holder, use a leveling tool to make sure that the toilet paper will be sitting flat.

    Editar

  4. Toilet Paper Holder Replacement: passo 3, imagem 1 %32 Toilet Paper Holder Replacement: passo 3, imagem 2 %32 Toilet Paper Holder Replacement: passo 3, imagem 3 %32

    • Place the new screw inside the new bracket and line up the mark with the base of the screw.

    • Make sure that the indentation for the toilet paper holder is facing in.

    • Repeat this for the top and bottom screws on both the left and right bracket bases (4 times total).

    Editar

  5. Toilet Paper Holder Replacement: passo 4, imagem 1 %32 Toilet Paper Holder Replacement: passo 4, imagem 2 %32 Toilet Paper Holder Replacement: passo 4, imagem 3 %32

    • Insert the spring loaded toilet roll bar and enjoy.

    Editar
Conclusão

Hopefully you have enjoyed exploring this repair guide and now understand how to repair and replace a broken toilet paper roll holder.

Uma outra pessoa concluiu este guia.

Autor(a)

com 5 outros contribuidores

Elizabeth Opheim

Membro desde: 01/19/16

121 Reputação

Autoria de 1 guia

Emblemas: 4

+1 outro emblema

Equipe

Oakland University, Team 6-1, Walwema Winter 2016 Membro de Oakland University, Team 6-1, Walwema Winter 2016

OAK-WALWEMA-W16S6G1

Membros da 10

Autoria de 10 guias

Um comentário

I don’t like the spring loaded holders. When we moved into our new house two years ago, One of the spring loaded holders was too far apart. Another was two close so roll would not rotate. The other two were ok. I replaced 3 of the 4 with the single arm holder. No need to fiddle with spring loaded holders. Slip on and slip off. Did the same at our previous house. I now have 3 spring loaded holders that I will donate or throw away.

Pete

Pete Chisteckoff - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 15

Últimos 30 dias: 38

Duração total: 5,221