The Claw Item Replacement

Alain Pierre e 2 outros colaboradores

Última atualização em February 11, 2024

5 - 10 minutos

Fácil

Pré-requisitos incompatíveis

Introdução

Vá para o passo 1

After repeated use of the claw machine, eventually you will run out of toys or candy to grab. In order to complete this task you will need to remove the top cover of your claw machine. Follow this user friendly guide to assist you with this task.

O que você precisa

Peças

Ferramentas

Phillips #1 Screwdriver

Exibir mais…

Passo 1 Top Cover

The Claw Item Replacement, Top Cover: passo 1, imagem 1 %32

Place The Claw machine in the up-right position with the control knobs facing you.

Editar

Passo 2

Turn The Claw machine upside-down placing the top cover on the surface of your work area.

Editar

Passo 3

Remove all ten 6mm phillips #1 screws underneath the top cover using your #1 phillips head screwdriver.
It is helpful to choose a clear, well lit work space. There are multiple tiny screws that are easy to lose.

Editar

Passo 4

Turn The Claw machine back to the upright position with controls facing you.

Editar

Passo 5

Remove the top cover of The Claw machine.

Editar

Passo 6

Remove the ten 6 mm phillips #1 screws from the top flange.

Editar

Passo 7

Lift the flange upward and off to the side of the machine.
There is enough wire connecting the flange to the machine that you will not need to cut the wire. The flange can be moved off to the side of the machine while you are working.
Cutting or ripping out the wire will cause damage to the machine so try not to put much tension on the wire.