Conserte seus objetos Comunidade Loja

Teenage Engineering OP-Z Back Cover Replacement

Introdução

Use this guide to open the OP-Z and replace the back cover.

  1. Teenage Engineering OP-Z Back Cover Replacement, Back Cover: passo 1, imagem 1 %32 Teenage Engineering OP-Z Back Cover Replacement, Back Cover: passo 1, imagem 2 %32 Teenage Engineering OP-Z Back Cover Replacement, Back Cover: passo 1, imagem 3 %32

    • Unlock the four rubber feet by turning them 90° counterclockwise using your thumb or finger tip.

    • There is a tiny mark on every foot facing the bottom edge of the OP-Z. After turning them they should face towards the short edge where the on/off switch is.

    Editar

  3. Teenage Engineering OP-Z Back Cover Replacement: passo 2, imagem 1 %32 Teenage Engineering OP-Z Back Cover Replacement: passo 2, imagem 2 %32

    • When turning the OP-Z over again the bottom plate should come off by itself (thanks gravity).

    • If the bottom plate won’t come off you might want to make sure every foot is rotated correctly and gently tug on one of them.

    Editar

  4. Teenage Engineering OP-Z Back Cover Replacement: passo 3, imagem 1 %32

    • Remove the bottom plate including the rubber feet.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 1 outro colaborador

Tobias Isakeit

Membro desde: 03/31/14

124.323 Reputação

Autoria de 189 guias

Emblemas: 46

+43 outros emblemas

Equipe

Tobias Isakeit - Repairability Engineer Membro de Tobias Isakeit - Repairability Engineer

Business

1 Membro

Autoria de 1.132 guias

3Comentários do guia

and uhm where to order the backplate? :/

boombipbass - Responder

Same question

Grant Dacklin -

Do you not sell the plate anymore?

Jason - Responder

Comentar

Visualizações:

Últimas 24 horas: 0

Últimos 7 dias: 6

Últimos 30 dias: 29

Ao todo: 1,758