Conserte seus objetos Comunidade Loja

Teddy Ruxpin Mouth Replacement

Introdução

If your Teddy Ruxpin’s mouth is not moving correctly or seems like it is malfunctioning, this replacement guide will help you fix your Teddy Ruxpin. The mouth should move along with storytime as audio is playing through the speaker. This guide will include desoldering and unscrewing, so be sure to utilize the iFixit desoldering guide while replacing this part as well as the other prerequisite guides.

O que você precisa

  1. Teddy Ruxpin Mouth Replacement, Battery: passo 1, imagem 1 %32 Teddy Ruxpin Mouth Replacement, Battery: passo 1, imagem 2 %32

    • Remove the vest covering the back of the bear.

    • Orient the bear with his back facing upwards and unscrew the single Phillips #2 screw.

    • Captured screws will stay in place, no need to worry about losing this one!

    Editar

  2. Teddy Ruxpin Mouth Replacement: passo 2, imagem 1 %32

    • Pull the tab outward to remove the protective plate for the batteries.

    Editar

  3. Teddy Ruxpin Mouth Replacement: passo 3, imagem 1 %32

    • Remove all four AA batteries by pushing the positive end down and pulling the battery out toward yourself.

    Editar

  4. Teddy Ruxpin Mouth Replacement, Arms: passo 4, imagem 1 %32 Teddy Ruxpin Mouth Replacement, Arms: passo 4, imagem 2 %32 Teddy Ruxpin Mouth Replacement, Arms: passo 4, imagem 3 %32

    • Cut the orange shirt and zip tie.

    • Remove the zip tie.

    Editar

  5. Teddy Ruxpin Mouth Replacement: passo 5, imagem 1 %32

    • Cut across the back seam of the head of the bear along the arrow.

    • This damages the bear's exterior and will require resewing.

    Editar

  7. Teddy Ruxpin Mouth Replacement: passo 6, imagem 1 %32 Teddy Ruxpin Mouth Replacement: passo 6, imagem 2 %32 Teddy Ruxpin Mouth Replacement: passo 6, imagem 3 %32

    • Remove the interior of the doll.

    • Peel the outer layer around the head of the bear and forcefully pry off the face of the bear from the outside layer of the bear.

    • This will be difficult and require significant force, but do not fear about breaking the doll at this stage.

    Editar

  8. Teddy Ruxpin Mouth Replacement: passo 7, imagem 1 %32 Teddy Ruxpin Mouth Replacement: passo 7, imagem 2 %32

    • Extract each arm button.

    • Pull on the stuffing of the bear and not the wire to remove the arm button.

    Editar

  9. Teddy Ruxpin Mouth Replacement: passo 8, imagem 1 %32 Teddy Ruxpin Mouth Replacement: passo 8, imagem 2 %32

    • Pull off the rest of the outside layer of the bear.

    Editar

  10. Teddy Ruxpin Mouth Replacement: passo 9, imagem 1 %32

    • Unplug the arms from the main body.

    Editar

  11. Teddy Ruxpin Mouth Replacement, Housing Cover: passo 10, imagem 1 %32 Teddy Ruxpin Mouth Replacement, Housing Cover: passo 10, imagem 2 %32 Teddy Ruxpin Mouth Replacement, Housing Cover: passo 10, imagem 3 %32

    • Unscrew the eleven circled 12.5mm Phillips #1 screws.

    • Remove the top of the housing to access the electronics inside.

    Editar

  12. Teddy Ruxpin Mouth Replacement, Eyes: passo 11, imagem 1 %32

    • Using a Phillips #1 screwdriver, remove the two 12.5mm screws connecting the eyes to the rest of the mechanism.

    Editar

  13. Teddy Ruxpin Mouth Replacement: passo 12, imagem 1 %32 Teddy Ruxpin Mouth Replacement: passo 12, imagem 2 %32

    • Unplug the two sets of wires connected to the back of the eyes by using moderate to high force.

    Editar

  14. Teddy Ruxpin Mouth Replacement: passo 13, imagem 1 %32

    • Once those wires are disconnected, desolder the wires connected from the eye motherboard.

    Editar

  15. Teddy Ruxpin Mouth Replacement, Mouth: passo 14, imagem 1 %32 Teddy Ruxpin Mouth Replacement, Mouth: passo 14, imagem 2 %32

    • Remove five 12.5mm Phillips #1 screws.

    • Pull the mouth mechanism out of the shell.

    Editar

  16. Teddy Ruxpin Mouth Replacement: passo 15, imagem 1 %32 Teddy Ruxpin Mouth Replacement: passo 15, imagem 2 %32

    • Unscrew the last 12.5mm Phillips #1 screw holding the mouth together

    • Open the mouth mechanism

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 3 outros contribuidores

Jayin Patel

Membro desde: 01/23/20

406 Reputação

Autoria de 4 guias

Emblemas: 7

+4 outros emblemas

Equipe

Cal Poly, Team S18-G5, White Winter 2020 Membro de Cal Poly, Team S18-G5, White Winter 2020

CPSU-WHITE-W20S18G5

Membros da 4

Autoria de 7 guias

3 comentários

His mouth and nose fell out leaving a hole in his face. How do i fix it or is the repair shop local? He is 30 years old.

rrhall559 - Responder

Mouth and nose fellout

rrhall559 - Responder

World of wonder made it and they aren’t in business anymore

rrhall559 - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 3

Últimos 7 dias: 9

Últimos 30 dias: 21

Duração total: 1,334