Conserte seus objetos Comunidade Loja

Spin Master Boxer Robot Speaker Replacement

Introdução

If Spin Master Boxer is not making any noises, follow this guide to replace speaker. The speaker is located inside of robot, and requires a Size 00 Philips Screwdriver to complete replacement, and requires soldering to remove the speaker.

O que você precisa

  1. Spin Master Boxer Robot Speaker Replacement, Robot Screen: passo 1, imagem 1 %32

    • Set Spin Master Boxer on your workspace so that the bottom panel faces upwards.

    Editar

  2. Spin Master Boxer Robot Speaker Replacement: passo 2, imagem 1 %32

    • Using a Phillips #00 screw driver, unscrew the four 4mm screws in each corner of the bottom panel.

    Editar

  3. Spin Master Boxer Robot Speaker Replacement: passo 3, imagem 1 %32

    • Carefully remove the bottom panel of the Spin Master Boxer by lifting up, away from the main body of robot.

    Editar

  5. Spin Master Boxer Robot Speaker Replacement: passo 4, imagem 1 %32 Spin Master Boxer Robot Speaker Replacement: passo 4, imagem 2 %32

    • While holding onto the axels of the wheels, gently pull the top panel of the robot away from its body.

    • Be aware when removing the panel that multiple wires connect it to the body of the Spin Master Boxer.

    Editar

  6. Spin Master Boxer Robot Speaker Replacement: passo 5, imagem 1 %32

    • Remove the plastic screen from the body of the robot. It should come off easily as it is not attached by anything.

    Editar

  7. Spin Master Boxer Robot Speaker Replacement, Robot Speaker: passo 6, imagem 1 %32 Spin Master Boxer Robot Speaker Replacement, Robot Speaker: passo 6, imagem 2 %32

    • Using a Phillips #00 screwdriver, unscrew the two 3mm screws connecting the black speaker cover to the top panel.

    Editar

  8. Spin Master Boxer Robot Speaker Replacement: passo 7, imagem 1 %32

    • Remove the speaker cover and you will be left looking at the speaker.

    • The speaker is soldered onto the top panel so additional measures must be taken to completely remove it. See Como soldar e dessoldar contatos

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 2 outros contribuidores

Lauren Roide

Membro desde: 04/16/19

739 Reputação

Autoria de 5 guias

Emblemas: 10

+7 outros emblemas

Equipe

Cal Poly, Team S1-G1, Maness Spring 2019 Membro de Cal Poly, Team S1-G1, Maness Spring 2019

CPSU-MANESS-S19S1G1

Membros da 4

Autoria de 10 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 5

Últimos 30 dias: 13

Duração total: 956