Introdução
This guide shows how to remove the Keypad.
O que você precisa
-
-
To remove the back cover, use your thumb to press down on the center of case and slide it off.
Pergunte ao FixBot
-
-
-
To remove the back case first remove the four screws shown with a T5 Torx screwdriver
-
-
-
-
Using your fingernail lift up the side of the casing around the bottom of the phone to release all five of the clips.
-
-
-
Use a plastic opening tool to lift up the brass colored panel.
-
-
-
Flip up the yellow tab using a plastic opening tool to disconnect the motherboard from the phone body.
-
-
-
Work the plastic opening tool around the edges of the motherboard to release it from the clips.
-
-
-
Using a plastic opening tool lift up the keypad to remove it.
-
To reassemble your device, follow these instructions in reverse order.
Cancelar: não concluí este guia.
Uma outra pessoa concluiu este guia.
Equipe
Cal Poly, Team 5-15, Maness Fall 2010 Membro de Cal Poly, Team 5-15, Maness Fall 2010
CPSU-MANESS-F10S5G15
4 Membros
Autoria de 26 guias
