Ir para o conteúdo principal

Skullcandy Crusher Wireless Headphone USB Connector Replacement

O que você precisa

  1. Skullcandy Crusher Wireless Headphone USB Connector Replacement, Ear Cushion: passo 1, imagem 1 %32 Skullcandy Crusher Wireless Headphone USB Connector Replacement, Ear Cushion: passo 1, imagem 2 %32
    • Take your headphones and hold them upside down for better control with your hands.

  2. Skullcandy Crusher Wireless Headphone USB Connector Replacement: passo 2, imagem 1 %32 Skullcandy Crusher Wireless Headphone USB Connector Replacement: passo 2, imagem 2 %32
    • Grab the ear cushion firmly between your thumb and forefinger with a tight grip.

    • Pull the ear cushion away from the plastic, covering the speaker, by sliding the ear cushion down to release it.

  3. Skullcandy Crusher Wireless Headphone USB Connector Replacement: passo 3, imagem 1 %32
    • Continue pulling it away from the edges of the plastic covering until the cushion is fully removed.

  4. Skullcandy Crusher Wireless Headphone USB Connector Replacement, USB Connector: passo 4, imagem 1 %32 Skullcandy Crusher Wireless Headphone USB Connector Replacement, USB Connector: passo 4, imagem 2 %32
    • Remove three 12 mm Phillips #1 screws located underneath the left ear cushion.

  5. Skullcandy Crusher Wireless Headphone USB Connector Replacement: passo 5, imagem 1 %32 Skullcandy Crusher Wireless Headphone USB Connector Replacement: passo 5, imagem 2 %32 Skullcandy Crusher Wireless Headphone USB Connector Replacement: passo 5, imagem 3 %32
    • Slide a plastic opening tool between the plastic frame and speaker assembly of the headphones.

    • Gently pry the speaker away from the frame of the headphones.

  6. Skullcandy Crusher Wireless Headphone USB Connector Replacement: passo 6, imagem 1 %32 Skullcandy Crusher Wireless Headphone USB Connector Replacement: passo 6, imagem 2 %32
    • Separate the headphone speaker assembly from headphone speaker frame.

  7. Skullcandy Crusher Wireless Headphone USB Connector Replacement: passo 7, imagem 1 %32
    • Inspect the USB port and ensure that it is connected correctly. If necessary, desolder the USB port and replace it with the new port.

    • For more information on soldering, please, use this Solder and Desolder Connections guide.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Val

Membro desde: 03/31/22

1.059 Reputação

Autoria de 6 guias

Equipe

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 4

Últimos 30 dias: 35

Duração total: 923