Pular para o conteúdo principal

Introdução

Screens can crack or wear out so you need to change the screen.

  1. Wedge a plastic opening tool in between the case.
    • Wedge a plastic opening tool in between the case.

  2. Starting with the bottom left corner, press down on the plastic opening tool to unhook the latches on the inside of the device. You have to start with the bottom left and right corners, and then flip the device to over and do the top of the device. You have to start with the bottom left and right corners, and then flip the device to over and do the top of the device.
    • Starting with the bottom left corner, press down on the plastic opening tool to unhook the latches on the inside of the device.

    • You have to start with the bottom left and right corners, and then flip the device to over and do the top of the device.

  3. Once unclipped, separate the back casing from the device.
    • Once unclipped, separate the back casing from the device.

  4. Remove the three 5.4mm JIS #00 screws from the motherboard. Remove the three 5.4mm JIS #00 screws from the motherboard.
    • Remove the three 5.4mm JIS #00 screws from the motherboard.

  5. Unlatch the two clips located at the top of the device that hold the motherboard in place.
    • Unlatch the two clips located at the top of the device that hold the motherboard in place.

  6. Lift the motherboard up from the bottom.
    • Lift the motherboard up from the bottom.

  7. Lift the screen up, so you can see where it is attached to the motherboard.
    • Lift the screen up, so you can see where it is attached to the motherboard.

  8. Use a spudger to flip up the retaining flap on the display ribbon cable ZIF socket.
    • Use a spudger to flip up the retaining flap on the display ribbon cable ZIF socket.

  9. Carefully pull the ribbon out from the ZIF connector.
    • Carefully pull the ribbon out from the ZIF connector.

  10. Take the black casing off the screen.
    • Take the black casing off the screen.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Angel Rivera

Membro desde: 25-01-2018

505 reputação

5 Guias de autoria

Equipe

USF Tampa, Team S7-G2, Passmore Spring 2018 Membro de USF Tampa, Team S7-G2, Passmore Spring 2018

USFT-PASSMORE-S18S7G2

4 Membros

5 Guias de autoria

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 5

Últimos 30 dias: 13

Todo: 85