Ir para o conteúdo principal

Screen Prerequisite (No LiDAR Assembly Removal)

Pré-requisito somente
Este guia destina-se apenas a ser usado como pré-requisito para outros guias. É incompleto por si só.

O que você precisa

  1. Screen Prerequisite (No LiDAR Assembly Removal), Disconnect the display cables: passo 1, imagem 1 %32 Screen Prerequisite (No LiDAR Assembly Removal), Disconnect the display cables: passo 1, imagem 2 %32 Screen Prerequisite (No LiDAR Assembly Removal), Disconnect the display cables: passo 1, imagem 3 %32
    • Use the pointed end of a spudger to pry up and disconnect the top two display cables.

  2. Screen Prerequisite (No LiDAR Assembly Removal), Disconnect the remaining display cables: passo 2, imagem 1 %32 Screen Prerequisite (No LiDAR Assembly Removal), Disconnect the remaining display cables: passo 2, imagem 2 %32 Screen Prerequisite (No LiDAR Assembly Removal), Disconnect the remaining display cables: passo 2, imagem 3 %32
    • Disconnect the two remaining display cables.

  3. Screen Prerequisite (No LiDAR Assembly Removal), Remove the screen: passo 3, imagem 1 %32
    • Grip the right edge of the screen and lift it away.

    • During reassembly, before installing a screen, remove any remaining adhesive from the frame, and clean the glued areas with high-strength (>90%) isopropyl alcohol and a lint-free cloth. This helps prep the iPad for fresh adhesive and ensures that it will bond properly.

    • If you plan to reinstall your existing screen, remove any remaining adhesive from the back and clean the adhered areas with isopropyl alcohol.

    • Follow this guide to install pre-cut adhesive strips on your iPad before sealing it up.

Linha de Chegada

Chayton Ritter

Membro desde: 08/21/20

22.506 Reputação

Autoria de 105 guias

Equipe

Guide Team Membro de Guide Team

Staff

Membros da 9

Autoria de 11.365 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 4

Últimos 30 dias: 5

Duração total: 11