Introdução

This guide outlines a procedure for completely removing and replacing a non-functioning motherboard on the Samsung SmartThings Hub.

Peças

Não são necessárias peças.

  1. To open your device, gently slide the grey bottom cover in the direction of the arrow as shown.
    • To open your device, gently slide the grey bottom cover in the direction of the arrow as shown.

  2. Make sure the batteries are removed before attempting disassembly. Using your Phillips #1 screwdriver, remove the four visible 12.5mm screws. Next, either peel up the longer of the two stickers or punch a hole with the tip of your screwdriver to access the fifth 12.5mm screw.
    • Make sure the batteries are removed before attempting disassembly.

    • Using your Phillips #1 screwdriver, remove the four visible 12.5mm screws.

    • Next, either peel up the longer of the two stickers or punch a hole with the tip of your screwdriver to access the fifth 12.5mm screw.

  3. Free shipping on all orders over US$100 or containing a Pro Tech Toolkit!

    Visite Nossa Loja
  4. Once all five screws are removed, split the casing apart by applying gentle upwards pressure against the positive terminals in the battery compartment. Once all five screws are removed, split the casing apart by applying gentle upwards pressure against the positive terminals in the battery compartment. Once all five screws are removed, split the casing apart by applying gentle upwards pressure against the positive terminals in the battery compartment.
    • Once all five screws are removed, split the casing apart by applying gentle upwards pressure against the positive terminals in the battery compartment.

  5. To remove the motherboard, grip the USB port and the Ethernet port. Lift up, then slide towards the front of the device to release the motherboard from the black retaining clip shown on the right. To remove the motherboard, grip the USB port and the Ethernet port. Lift up, then slide towards the front of the device to release the motherboard from the black retaining clip shown on the right.
    • To remove the motherboard, grip the USB port and the Ethernet port. Lift up, then slide towards the front of the device to release the motherboard from the black retaining clip shown on the right.

  6. Replace with new, known-good motherboard.
    • Replace with new, known-good motherboard.

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas concluíram este guia.

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 19

Todo: 263