Introdução

Is your flash weak or not working at all? It could be your flash capacitor. Here's a replacement guide to help.

Unscrew all visible screws indicated by red circles with a #00 Phillips driver.
  • Unscrew all visible screws indicated by red circles with a #00 Phillips driver.

  • Slide memory card cover and unscrew hidden screw underneath with a #00 Phillips driver.

Adicionar comentário

Remove the flat side panel by applying gentle pressure toward the bottom of the camera.
  • Remove the flat side panel by applying gentle pressure toward the bottom of the camera.

  • Remove the corner panel by applying pressure away from the shutter button.

  • The memory card cover will come off with the corner panel.

  • Remove the top panel by applying gentle pressure away from the shutter button.

Adicionar comentário

  • Remove screws beneath the top panel indicated by red circles with a #00 Phillips driver.

Adicionar comentário

  • Remove the front and back covers by pulling them straight apart.

Adicionar comentário

  • Remove the screw securing the shutter button.

  • Lift the shutter button to remove it.

Adicionar comentário

  • Remove the 3 visible screws with a Phillips #000 Driver

  • Move the circuitry and wires out of the way to expose another screw, and remove it with the same driver.

Adicionar comentário

  • Pull the flash capacitor out of its compartment to expose the wires connected to it.

  • Cut the connecting wires with wire cutters.

  • Solder the wires to the new power source with a soldering iron and electrical solder.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 1

Todo: 50