Introdução

This guide shows how to take out the antenna so that a replacement can be installed.

Peças

Não são necessárias peças.

  1. Apply pressure to the back cover and slide it forward towards the camera.
    • Apply pressure to the back cover and slide it forward towards the camera.

    • Lift the back cover off the phone.

  2. Holding the phone firmly, use the notches to grip and lift up the battery.
    • Holding the phone firmly, use the notches to grip and lift up the battery.

    • Remove the four 4.45mm screws at the corners of the phone.

    • Use the plastic opening tool to unhinge the locks around the edges of the phone.

    • Do not worry about the inner components of the phone; they are not connected to this case.

    • Lift the casing off of the phone.

    • With the screws removed, locate the antenna.

    • Using a Phillips head screwdriver, remove the 4.50mm screw holding the antenna in place.

    • Using the plastic opener tool, squeeze gently on the antenna cable connector and lift to remove the connector from its position.

    • Gently lift up on the antenna and remove it from the back of the device.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Jimmy Kuo

Member since: 10-10-2011

14 reputação

2 Guides authored

Equipe

Cal Poly, Team 3-13, Regan Fall 2011 Membro de Cal Poly, Team 3-13, Regan Fall 2011

CPSU-REGAN-F11S3G13

4 Membros

16 Guides authored

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Todo: 966