Conserte seus objetos Comunidade Loja

Samsung Galaxy Tab S2 9.7 AT&T Camera Replacement

Introdução

A broken camera can cause poor photo quality or may not be able to take any photos at all.

O que você precisa

  1. Samsung Galaxy Tab S2 9.7 AT&T Camera Replacement, Screen: passo 1, imagem 1 %32 Samsung Galaxy Tab S2 9.7 AT&T Camera Replacement, Screen: passo 1, imagem 2 %32

    • Apply the heat gun around the edges of the tablet to melt the adhesive glue.

    • Do not allow the gun to remain still for more than two seconds, so that you do not melt the plastic around the screen.

    • If you do not have access to a heat gun, you may also use an iOpener or a hair dryer. Refer to the iOpener guide for extra help.

    Editar

  2. Samsung Galaxy Tab S2 9.7 AT&T Camera Replacement: passo 2, imagem 1 %32 Samsung Galaxy Tab S2 9.7 AT&T Camera Replacement: passo 2, imagem 2 %32

    • Apply the suction to the bottom or top right corner.

    • Use the plastic opening tool at several points around the screen while the suction is being applied to pop the screen out.

    Editar

  3. Samsung Galaxy Tab S2 9.7 AT&T Camera Replacement: passo 3, imagem 1 %32

    • Once the screen is detached, open the tablet like a book.

    • Gently open the tablet, and do not pull the pieces apart since you can risk damaging the orange ribbon cable.

    Editar

  5. Samsung Galaxy Tab S2 9.7 AT&T Camera Replacement: passo 4, imagem 1 %32

    • Using the precision tweezers, remove the silver tape that is holding the orange ribbon cable connecting the two pieces.

    Editar

  6. Samsung Galaxy Tab S2 9.7 AT&T Camera Replacement: passo 5, imagem 1 %32

    • Using the precision tweezers, remove the small press-fit connector from the body of the tablet.

    Editar

  7. Samsung Galaxy Tab S2 9.7 AT&T Camera Replacement, Screws: passo 6, imagem 1 %32 Samsung Galaxy Tab S2 9.7 AT&T Camera Replacement, Screws: passo 6, imagem 2 %32

    • Using the Philips #000 screwdriver, remove the seventeen 2.74 mm screws around the edges.

    • Remove the two 2.74 mm black screws in the middle of the tablet with the Philips #000 screwdriver.

    • Put the screws on a magnetic project mat or in a container so that you do not lose them.

    Editar

  8. Samsung Galaxy Tab S2 9.7 AT&T Camera Replacement: passo 7, imagem 1 %32 Samsung Galaxy Tab S2 9.7 AT&T Camera Replacement: passo 7, imagem 2 %32 Samsung Galaxy Tab S2 9.7 AT&T Camera Replacement: passo 7, imagem 3 %32

    • Take the plastic opening tool around the tablet to remove the motherboard from the device.

    Editar

  9. Samsung Galaxy Tab S2 9.7 AT&T Camera Replacement, Camera: passo 8, imagem 1 %32 Samsung Galaxy Tab S2 9.7 AT&T Camera Replacement, Camera: passo 8, imagem 2 %32 Samsung Galaxy Tab S2 9.7 AT&T Camera Replacement, Camera: passo 8, imagem 3 %32

    • Locate the two cameras at the top of the motherboard.

    • To remove the bigger, back-facing camera, use the precision tweezers to slide the silver ribbon cable out of the ZIF connector.

    Editar

  10. Samsung Galaxy Tab S2 9.7 AT&T Camera Replacement: passo 9, imagem 1 %32 Samsung Galaxy Tab S2 9.7 AT&T Camera Replacement: passo 9, imagem 2 %32

    • To remove the smaller, front-facing camera, use the precision tweezers to disconnect the press-fit connector.

    • Carefully detach the camera using the precision tweezers.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Autor(a)

com 4 outros contribuidores

Joy Harris

Membro desde: 02/15/17

814 Reputação

Autoria de 7 guias

Emblemas: 15

+12 outros emblemas

Equipe

USF Tampa, Team S3-G4, Sullivan Spring 2017 Membro de USF Tampa, Team S3-G4, Sullivan Spring 2017

USFT-SULLIVAN-S17S3G4

Membros da 3

Autoria de 14 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 318