Samsung CLP-300 Imaging Unit Replacement - Guia de Reparo iFixit

Participe da comunidade de reparos - Criar conta

Introdução

Follow these easy steps to replace the imaging unit in your Samsung CLP-300.

1. Passo 1 Imaging Unit
  Turn the printer off and wait a few minutes for it to cool.
  Editar
  
  Pergunte ao FixBot
  
  Comentar
  
  1024
2. Passo 2
  Open the front cover
  Editar
  
  Pergunte ao FixBot
  
  Comentar
  
  1024
4. Passo 3
  Remove waste toner container from the printer.
  Editar
  
  Pergunte ao FixBot
  
  Comentar
  
  1024
5. Passo 4
  Pull the imaging unit out of the printer using bottom handle.
  
  Use green handle on top of imaging unit to steady unit as you pull it out.
  
  Holding the top and bottom handles on the new imaging unit, slide the unit in the printer until you hear a “click.”
  
  Remove new imaging unit from its packaging making sure to remove protective paper and devices from unit
  
  Do not expose new imaging unit to light for more than a few minutes. Covering unit with a piece of paper is sufficient protection while you complete repair.
  
  If you hear a crackling sound once the printer turns on the imaging unit is not installed correctly. Take out and reinsert the unit.
  Editar
  
  Pergunte ao FixBot
  
  Comentar
  
  1024

Conclusão

To reassemble your device, follow these instructions in reverse order.

Cancelar: não concluí este guia.

2 outras pessoas executaram este guia.

Autor(a)

com 3 outros contribuidores

Heather Howard

Membro desde: 10/15/14

586 Reputação

Autoria de 4 guias

+5 outros emblemas

Equipe

University of Maine, Team 1-1, Diaz Fall 2014 Membro de University of Maine, Team 1-1, Diaz Fall 2014

UMAINE-DIAZ-F14S1G1

3 Membros

Autoria de 28 guias

0Comentários do guia

Visualizações:

Últimas 24 horas: 2

Últimos 7 dias: 11

Últimos 30 dias: 38

Ao todo: 14,068