Conserte seus objetos Comunidade Loja

Ryobi P271 Trigger Replacement

Introdução

This repair is for if your trigger on your drill stops working or has issues cutting in and out. Soldering is required for this repair and it will fix your drill trigger for future use.

O que você precisa

  1. Ryobi P271 Trigger Replacement, Battery: passo 1, imagem 1 %32 Ryobi P271 Trigger Replacement, Battery: passo 1, imagem 2 %32 Ryobi P271 Trigger Replacement, Battery: passo 1, imagem 3 %32

    • Detach the battery unit from the drill body by pressing the battery release buttons on both sides of the unit and pulling outwards.

    Editar

  2. Ryobi P271 Trigger Replacement, Trigger: passo 2, imagem 1 %32

    • Remove the screws from the drill's casing to gain access to the interior.

    Editar

  4. Ryobi P271 Trigger Replacement: passo 3, imagem 1 %32

    • Lift and remove the casing off of the drill body.

    Editar

  5. Ryobi P271 Trigger Replacement: passo 4, imagem 1 %32

    • Carefully lift and remove the battery clip, trigger, motor, and everything connected to the wires and pull straight out of the drill.

    Editar

  6. Ryobi P271 Trigger Replacement: passo 5, imagem 1 %32

    • Separate the wiring from the trigger and the motor using a soldering iron and them replace them with a new trigger and motor by soldering the wires back together.

    • Follow this guide for soldering tips.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 6 outros contribuidores

nathan krehbiel

Membro desde: 11/05/19

229 Reputação

Autoria de 2 guias

Emblemas: 3

Equipe

UMass Dartmouth, Team S2-G6, Barthe Fall 2019 Membro de UMass Dartmouth, Team S2-G6, Barthe Fall 2019

UMASSD-BARTHE-F19S2G6

Membros da 3

Autoria de 10 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 7

Últimos 30 dias: 10

Duração total: 475