Conserte seus objetos Comunidade Loja

Roku XD 2050X Composite Video Port Replacement

Introdução

Use this guide to replace a damaged or malfunctioning video port on the Roku XD 2050X. To complete this guide, you will need to disassemble your device and use a soldering iron to replace the port.

O que você precisa

  1. Roku XD 2050X Composite Video Port Replacement, Case: passo 1, imagem 1 %32 Roku XD 2050X Composite Video Port Replacement, Case: passo 1, imagem 2 %32 Roku XD 2050X Composite Video Port Replacement, Case: passo 1, imagem 3 %32

    • Ensure the Roku XDis unplugged.

    • Take care when handling components. Circuit boards, soldering points, and other areas may have sharp points.

    • Turn the device upside down.

    • Remove the two rubber pads using a plastic spudger.

    Editar

  2. Roku XD 2050X Composite Video Port Replacement: passo 2, imagem 1 %32 Roku XD 2050X Composite Video Port Replacement: passo 2, imagem 2 %32

    • Remove the two Phillips #1 9mm pan-head screws.

    Editar

  4. Roku XD 2050X Composite Video Port Replacement: passo 3, imagem 1 %32 Roku XD 2050X Composite Video Port Replacement: passo 3, imagem 2 %32 Roku XD 2050X Composite Video Port Replacement: passo 3, imagem 3 %32

    • Insert spudger between upper and lower frame underneath the port access.

    • Guide spudger around to loosen upper and lower frame to pry frame apart.

    • Gently remove upper frame.

    Editar

  5. Roku XD 2050X Composite Video Port Replacement: passo 4, imagem 1 %32 Roku XD 2050X Composite Video Port Replacement: passo 4, imagem 2 %32

    • Remove the two Phillips #1 8mm pan-head screws.

    Editar

  6. Roku XD 2050X Composite Video Port Replacement: passo 5, imagem 1 %32

    • On the side of the board opposite the ports, find and tilt back the tab securing the board in place.

    • Lift the motherboard out of the lower frame.

    Editar

  7. Roku XD 2050X Composite Video Port Replacement, Composite Video Port: passo 6, imagem 1 %32

    • Desolder the leads for the composite video port that are circled.

    • Remove the video port from the board.

    • For help with soldering view the iFixit soldering guide.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Duração total: 591