Introdução

The Roku Streaming Stick remote is a device that is used to control the operation of the Roku from a distance. This guide will provide instructions on how to replace the macro buttons.

  1. Place the remote so that the battery cover is facing upwards.
    • Place the remote so that the battery cover is facing upwards.

    Adicionar comentário

  2. Remove the battery cover to expose the battery compartment.
    • Remove the battery cover to expose the battery compartment.

    Adicionar comentário

    • Remove batteries.

    Adicionar comentário

    • Use a Phillips #00 screwdriver to remove the 1.5 mm wide screw.

    Adicionar comentário

    • Use a plastic opening tool to gently pry apart the plastic enclosure. Make sure you create a large enough gap before you attempt to separate the two pieces.

    Adicionar comentário

    • Gently remove the circuit board or motherboard.

    Adicionar comentário

    • First, gently remove the three plastic sheets. Then, remove the button panels from the remote control.

    • Repair the contact sheet as noted on the Button Contact Repair Kit listed above. Otherwise replace with new conductive button contacts.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Feliciano Bandazi

Member since: 07-04-2018

145 reputação

Autoria de 1 guia

Equipe

IUPUI, Team S2-G2, Wilson Spring 2018 Membro de IUPUI, Team S2-G2, Wilson Spring 2018

IUPUI-WILSON-S18S2G2

4 Membros

3 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 3

Últimos 7 dias: 12

Últimos 30 dias: 42

Todo: 220