Ir para o conteúdo principal

Ridgid GEN5X R8642 Switch Replacement

O que você precisa

  1. Ridgid GEN5X R8642 Switch Replacement, Switch: passo 1, imagem 1 %32
    • Remove the plastic tab holding the handle cover in place by prying upward with the spudger until the tab pops off.

  2. Ridgid GEN5X R8642 Switch Replacement: passo 2, imagem 1 %32
    • Remove the handle cover by pulling it towards the front of the saw.

    • The grip can sometimes become stuck and may require a decent amount of force to remove.

  3. Ridgid GEN5X R8642 Switch Replacement: passo 3, imagem 1 %32 Ridgid GEN5X R8642 Switch Replacement: passo 3, imagem 2 %32
    • Use a T20 Torx screwdriver to remove the nine M4 X 16mm screws from the plastic housing.

  4. Ridgid GEN5X R8642 Switch Replacement: passo 4, imagem 1 %32
    • Use a JIS #1 screwdriver to remove the two M4 x 25mm screws on both sides of the metal housing.

  5. Ridgid GEN5X R8642 Switch Replacement: passo 5, imagem 1 %32
    • Remove one half of the plastic housing using a spudger so that the internal system is exposed.

  6. Ridgid GEN5X R8642 Switch Replacement: passo 6, imagem 1 %32
    • Remove the plastic wire covers to the red and black connections on the switch assembly.

  7. Ridgid GEN5X R8642 Switch Replacement: passo 7, imagem 1 %32
    • Remove the soldered connection from the switch assembly.

  8. Ridgid GEN5X R8642 Switch Replacement: passo 8, imagem 1 %32
Conclusão

To reassemble your device, follow these instructions in reverse order.

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 3

Últimos 30 dias: 10

Duração total: 284