Introdução

Clean the head of the hairdryer, including the vent, to prevent the fan from getting clogged. Debris in the fan may cause a rattling noise or cause the fan to stop working.

Before disassembly, make sure that the device is unplugged.
  • Before disassembly, make sure that the device is unplugged.

  • Unscrew the two 17.83 mm black screws located on the handle.

Adicionar comentário

Separate the shell from the main component.
  • Separate the shell from the main component.

  • Make sure that the each piece is free from debris.

Adicionar comentário

  • Continue to pull the components apart.

  • For reassembly, put the silver encasing on before the the black cover.

Adicionar comentário

  • Take the head of the hairdryer and pull the pieces apart.

Adicionar comentário

  • Remove the black vent from the grey cylindrical piece.

Adicionar comentário

  • If there is lint in the vent, use tweezers or a toothbrush to extract it from the vent.

  • This will keep the fan from getting clogged and malfunctioning.

Adicionar comentário

  • Clean the other black vent with a toothbrush.

Adicionar comentário

  • Clean these two components with a paper towel.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Jessica Leyva

Member since: 18-09-2012

80 reputação

5 Guides authored

Equipe

Cal Poly, Team 1-5, Propen Fall 2012 Membro de Cal Poly, Team 1-5, Propen Fall 2012

CPSU-PROPEN-F12S1G5

3 Membros

5 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 3

Últimos 30 dias: 17

Todo: 973