Introdução

Canon "E-18 error" happens when the lens gets stuck in the extended position. The LCD will display a little E-18 in the lower-left corner and start beeping.

Peças

Não são necessárias peças.

  1. Place camera lens facing upwards on the table.
    • Place camera lens facing upwards on the table.

    • Press and hold down the power button.

    • Simultaneously press down the shutter button.

  2. Free shipping on all orders over US$100 or containing a Pro Tech Toolkit!

    Visite Nossa Loja
  3. Replace the batteries in the camera.
    • Replace the batteries in the camera.

    • To open the battery cover slide the black lever on the underside of the camera and pull the cover toward the front.

    • Remove the old batteries from the camera and wait a few moments.

    • Put in a fresh set of batteries.

    • Close battery slide and power camera back on.

  4. Put blow dryer in the "no heat" setting prior to plugging it in.
    • Put blow dryer in the "no heat" setting prior to plugging it in.

    • Plug in and turn the blow dryer on.

    • Blow air in the gaps between the lens.

Conclusão

In conclusion, using this guide to fix the E-18 on the lens of the Canon PowerShot A80,will allow the camera to capture photos once again. To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Tim

Member since: 06-01-2011

151 reputação

Autoria de 1 guia

Equipe

Cal Poly, Team 7-31, Regan Winter 2011 Membro de Cal Poly, Team 7-31, Regan Winter 2011

CPSU-REGAN-W11S7G31

6 Membros

6 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 3

Todo: 3,585