Introdução

Only requires removing a few screws. No special tools required.

Peças

Não são necessárias peças.

Flip the camera so that the bottom is facing you.
  • Flip the camera so that the bottom is facing you.

  • Take a spare coin and unscrew the battery cover off.

Adicionar comentário

Remove the batteries, making sure to note their proper alignment.
  • Remove the batteries, making sure to note their proper alignment.

Adicionar comentário

  • Remove two 4.8mm screws.

  • Remove one 3.4mm screw.

  • Remove one 2.65mm screw.

  • Lift off the back cover.

Adicionar comentário

  • Remove three 3.5mm screws.

  • Remove two 3.8mm screws.

  • Remove one 6.35mm screw.

  • Remove one 4mm screw. Lift off the disk.

  • Remove one 5.11mm screw.

Adicionar comentário

  • Lift up the silver, metal piece

  • Please note that some internal pieces may come loose during this process.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas concluíram este guia.

Nick

Member since: 19-04-2011

411 reputação

4 Guides authored

Equipe

Cal Poly, Team 8-7, Regan Spring 2011 Membro de Cal Poly, Team 8-7, Regan Spring 2011

CPSU-REGAN-S11S8G7

4 Membros

4 Guides authored

good advice, will use, have multiple Minolta cameras to work with.

gabriel johnson - Responder

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 16

Últimos 30 dias: 39

Todo: 8,026