Conserte seus objetos Comunidade Loja

Remove the Screen

O que você precisa

  1. Remove the Screen, Remove Screws: passo 1, imagem 1 %32 Remove the Screen, Remove Screws: passo 1, imagem 2 %32 Remove the Screen, Remove Screws: passo 1, imagem 3 %32

    • Remove the screws from the bottom, right, and left side of camera.

    Editar

  2. Remove the Screen, Remove back: passo 2, imagem 1 %32

    • Remove the back of the camera, this may require force.

    Editar

  3. Remove the Screen, Remove Metal Bracket: passo 3, imagem 1 %32

    • Unscrew the right metal bracket of the viewing lens

    Editar

  4. Remove the Screen, Remove front of camera: passo 4, imagem 1 %32 Remove the Screen, Remove front of camera: passo 4, imagem 2 %32

    • Hello! Today you are going to be learning how to disassemble the front camera of a Nikon Coolpix 5600. You will need a Nikon Coolpix, Ifixit opening tool and a Phillips Screwdriver #00. The first step is to pull the front of the camera off of the mother board. To do this you must pull at each side of front and back on the camera.

    Editar

  6. Remove the Screen: passo 5, imagem 1 %32 Remove the Screen: passo 5, imagem 2 %32

    • Next, pull the grey circular facet that sits on the bottom outside of the camera off by using blue Ifixit opening tool. It is okay to use force if needed.

    Editar

  7. Remove the Screen: passo 6, imagem 1 %32

    • Now take your Phillips #00 screwdriver and unscrew the bottom right corner screw. Once the screw is out just place it on the table.

    Editar

  8. Remove the Screen: passo 7, imagem 1 %32

    • Finally, take the same Phillips screwdriver and unscrew the top right corner screw. Place the top screw on the table as well. Now you have accurately disassembled the front camera of a Nikon Coolpix 5600.

    Editar

  9. Remove the Screen, Remove the Screen: passo 8, imagem 1 %32

    • Unhinge the outer case of the screen from the back of the camera. The screen should still be hanging by wires.

    Editar

  10. Remove the Screen: passo 9, imagem 1 %32

    • Remove outer case/rim of screen from the back of the camera. The screen should still be hanging by the red wire and white wire.

    Editar

  11. Remove the Screen: passo 10, imagem 1 %32

    • Pull out the red wire and white wire attaching the screen to the motherboard.

    Editar

  12. Remove the Screen: passo 11, imagem 1 %32

    • Flip up black lever holding data cable to motherboard, and remove data cable from motherboard.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Autor(a)

com 3 outros contribuidores

Melissa

Membro desde: 02/12/13

246 Reputação

Autoria de 2 guias

Emblemas: 9

+6 outros emblemas

Equipe

Ohio State, Team 1-2, Buehl Spring 2013 Membro de Ohio State, Team 1-2, Buehl Spring 2013

OSU-BUEHL-S13S1G2

2 Membros

Autoria de 7 guias

0Comentários do guia

Comentar

Visualizações:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 6

Ao todo: 526