Raleigh M20 Bicycle Rear Rack Replacement

Este guia tem alterações mais recentes. Mudar para a última versão não verificada.

Introdução

This guide demonstrates how to remove and replace a rear rack from the Raleigh M20 bicycle. This requires the removal of the old rear rack before replacing the new rear rack.

O que você precisa

Passo 1 Bicycle Rear Rack

Raleigh M20 Bicycle Rear Rack Replacement, Bicycle Rear Rack: passo 1, imagem 1 %32

Raleigh M20 Bicycle Rear Rack Replacement, Bicycle Rear Rack: passo 1, imagem 2 %32

Make sure that the bike is upright and stable.
With both hands, place the rear rack on the rear wheel of the bike. Take note of where the rear rack will attach on the bike.
Make sure that the rear rack is fitted on the bike.

Editar

Passo 2

Raleigh M20 Bicycle Rear Rack Replacement: passo 2, imagem 3 %32

Place a screw to attach the rear rack to the frame of the tire.
Tighten the screw with a philips screwdriver by turning it in a clockwise direction.
Repeat the steps above on the other side of the bike.

Editar

Passo 3

Raleigh M20 Bicycle Rear Rack Replacement: passo 3, imagem 3 %32

Place the metal holder to be even with the bar sticking out of the rear rack.
Line up the holes. Place a bolt to attach them together.
Use a philips screwdriver to tighten the bolts.
Do this for both sides.

Editar

Passo 4

Make sure that the rear rack is even. If it is not, redo the previous step.
Locate the screws on top of the rear rack. Tighten the screws using a philips screwdriver.
Once the screws are tightened, you are done.