Conserte seus objetos Comunidade Loja

RCA RCT6272W23 Display Replacement

Introdução

In this guide, you will learn how to replace the display screen on your RCA RCT6272W23 tablet.

O que você precisa

  1. RCA RCT6272W23 Display Replacement, Case: passo 1, imagem 1 %32 RCA RCT6272W23 Display Replacement, Case: passo 1, imagem 2 %32

    • Use a Phillips #00 screwdriver to remove both 4.1 mm screws at the top of the device which hold it together.

    Editar

  2. RCA RCT6272W23 Display Replacement: passo 2, imagem 1 %32 RCA RCT6272W23 Display Replacement: passo 2, imagem 2 %32

    • Press the plastic opening tool into the space between the front and back portions of the case.

    • Run it along the perimeter of the device to unhook the plastic tabs.

    • Gently pull both sides apart.

    • The speaker is connected to the back cover, so be careful when separating.

    Editar

  3. RCA RCT6272W23 Display Replacement, Motherboard: passo 3, imagem 1 %32 RCA RCT6272W23 Display Replacement, Motherboard: passo 3, imagem 2 %32 RCA RCT6272W23 Display Replacement, Motherboard: passo 3, imagem 3 %32

    • Use a soldering iron to remove the soldered connections on the motherboard

    • For your safety and to ensure a correct repair, be sure to exercise caution when using the soldering iron.

    • For more information about soldering, check out this guide.

    Editar

  4. RCA RCT6272W23 Display Replacement: passo 4, imagem 1 %32

    • Use a philips #00 screwdriver to unscrew the three 4.064mm screws which attach the motherboard to the front of the device.

    Editar

  5. RCA RCT6272W23 Display Replacement: passo 5, imagem 1 %32 RCA RCT6272W23 Display Replacement: passo 5, imagem 2 %32

    • Use your fingers to pop the three black tabs up to release the flat plastic data transfer cables.

    Editar

  6. RCA RCT6272W23 Display Replacement: passo 6, imagem 1 %32

    • Pull up the motherboard from the rest of the body.

    Editar

  7. RCA RCT6272W23 Display Replacement, Display: passo 7, imagem 1 %32

    • Using a plastic opening tool, pry the battery off of the rest of the body.

    • The battery is attached to the display with double sided tape. It may be best to have a new strip of double sided tape to reattach the battery.

    Editar

  8. RCA RCT6272W23 Display Replacement: passo 8, imagem 1 %32 RCA RCT6272W23 Display Replacement: passo 8, imagem 2 %32 RCA RCT6272W23 Display Replacement: passo 8, imagem 3 %32

    • Using a spudger, separate the display surface from the front cover.

    • Be careful not to break the tabs that hold the display screen in place.

    • A second spudger may be necessary to help hold the position of the display screen.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

4 outras pessoas executaram este guia.

Autor(a)

com 4 outros contribuidores

Ross Pennala

Membro desde: 03/19/15

214 Reputação

Autoria de 1 guia

Emblemas: 10

+7 outros emblemas

Equipe

Michigan Tech, Team 1-5, Lauer Spring 2015 Membro de Michigan Tech, Team 1-5, Lauer Spring 2015

MTU-LAUER-S15S1G5

Membros da 2

Autoria de 12 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 4

Últimos 30 dias: 22

Duração total: 2,295