Introdução

This guide will help you replace your lens if they get scratched or broken.

Remove the phone slide from the virtual reality lens.
  • Remove the phone slide from the virtual reality lens.

  • Take the outside cover off using a plastic opening tool.

Adicionar comentário

Remove each screw from its place.
  • Remove each screw from its place.

    • Four screws will be 6mm Phillips head.

    • Twelve screws will be 7mm Phillips head.

  • Pull each bracket out so you can see the full lens case.

Adicionar comentário

  • You will need to remove the adjustable lens lever on top of the virtual reality lens.

  • Using a tweezers, you will need to separate the tooth gears and remove them so the lens can fall freely out.

  • Pull the lens case out from the front of the headset.

Adicionar comentário

  • To get the actual lens out, you will need to push the lens from the outside in with a little force to break the lens out of it's case.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Austin Fedie

Member since: 15-02-2018

159 reputação

Autoria de 1 guia

Equipe

UW Stout, Team S8-G6, Ogden Spring 2018 Membro de UW Stout, Team S8-G6, Ogden Spring 2018

UWSTOUT-OGDEN-S18S8G6

3 Membros

4 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Todo: 23