Conserte seus objetos Comunidade Loja
Participe da comunidade de reparos - Criar conta

ProScan PLT7223G Speakers Replacement

Introdução

If your ProScan's audio is not working, use this guide to replace the speakers. This guide will require soldering.

O que você precisa

  1. ProScan PLT7223G Speakers Replacement, Speakers: passo 1, imagem 1 %32

    • Remove both 4 mm screws on the top of the tablet with a PH00 screw driver.

    Editar
    Pergunte ao FixBot

  2. ProScan PLT7223G Speakers Replacement: passo 2, imagem 1 %32

    • Use the blue plastic opening tool to pry open the tablet.

    • You will hear popping sounds. That's okay.

    • Be careful when using the blue plastic opening tool on the side of the device near the speakers, as there is a wire here that connects the speakers to the motherboard.

    Editar
    Pergunte ao FixBot

  4. ProScan PLT7223G Speakers Replacement: passo 3, imagem 1 %32

    • Pull back the protective tape from the two wires that connect the speakers to the motherboard.

    Editar
    Pergunte ao FixBot

  5. ProScan PLT7223G Speakers Replacement: passo 4, imagem 1 %32

    • Use the soldering tool to remove speaker wires from motherboard.

    • Soldering tool will get hot, handle with care.

    Editar
    Pergunte ao FixBot

  6. ProScan PLT7223G Speakers Replacement: passo 5, imagem 1 %32 ProScan PLT7223G Speakers Replacement: passo 5, imagem 2 %32

    • If needed use a plastic opening tool to remove speaker from the speaker port on the tablet.

    Editar
    Pergunte ao FixBot
Conclusão

To reassemble your device, follow these instructions in reverse order.

0Comentários do guia

Comentar

Visualizações:

Últimas 24 horas: 1

Últimos 7 dias: 6

Últimos 30 dias: 47

Ao todo: 538