Ir para o conteúdo principal

ProScan PLT7223G Front Facing Camera Replacement

O que você precisa

  1. ProScan PLT7223G Front Facing Camera Replacement, Front Facing Camera: passo 1, imagem 1 %32
    • Remove both 4 mm screws on the top of the tablet with a PH00 screw driver.

  2. ProScan PLT7223G Front Facing Camera Replacement: passo 2, imagem 1 %32
    • Use the blue plastic opening tool to pry open the tablet.

    • You will hear popping sounds. That's okay.

    • Be careful when using the blue plastic opening tool on the side of the device near the speakers, as there is a wire here that connects the speakers to the motherboard.

  3. ProScan PLT7223G Front Facing Camera Replacement: passo 3, imagem 1 %32
    • With a spudger, flip up the ZIF connector that connects the camera's ribbon cable to the motherboard. This will release the ribbon cable.

  4. ProScan PLT7223G Front Facing Camera Replacement: passo 4, imagem 1 %32
    • Remove the black tape holding down the ribbon cable.

  5. ProScan PLT7223G Front Facing Camera Replacement: passo 5, imagem 1 %32
    • Remove camera.

Conclusão

To reassemble your device, follow these instructions in reverse order.

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 1

Duração total: 240