Conserte seus objetos Comunidade Loja

ProScan PLT7223G Battery Replacement

Introdução

If your device will not turn on at all, use this guide to replace your dead or dying battery and make your device functional again.

O que você precisa

  1. ProScan PLT7223G Battery Replacement, Battery: passo 1, imagem 1 %32

    • Remove both 4 mm screws on the top of the tablet with a PH00 screw driver.

    Editar

  2. ProScan PLT7223G Battery Replacement: passo 2, imagem 1 %32

    • Use the blue plastic opening tool to pry open the tablet.

    • You will hear popping sounds. That's okay.

    • Be careful when using the blue plastic opening tool on the side of the device near the speakers, as there is a wire here that connects the speakers to the motherboard.

    Editar

  4. ProScan PLT7223G Battery Replacement: passo 3, imagem 1 %32

    • Use a soldering tool and tweezers to remove the black and red wire from the motherboard.

    • Be sure to pay attention to where each wire goes so that you attach them in the correct order when reassembling the device.

    • Soldering tool will get hot, handle with care.

    Editar

  5. ProScan PLT7223G Battery Replacement: passo 4, imagem 1 %32

    • Use a spudger to remove the black tape from the battery.

    Editar

  6. ProScan PLT7223G Battery Replacement: passo 5, imagem 1 %32

    • Using the flat end of a spudger, carefully separate the battery from the base of the device.

    • There is an adhesive holding the charger in place.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

3 outras pessoas executaram este guia.

2 comentários

what is the number of the replacement battery??

florcomm - Responder

How will I know if my proscan tablet battery is no good once I remove it

Genica Harmon - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 8

Últimos 30 dias: 14

Duração total: 4,242