Conserte seus objetos Comunidade Loja

Pokewalker Button Replacement

Introdução

How to Replace a Cracked or Broken Button on a Pokewalker

O que você precisa

  1. Pokewalker Button Replacement, Battery: passo 1, imagem 1 %32

    • Locate the Screw on the Back of the Pokewalker.

    Editar

  2. Pokewalker Button Replacement: passo 2, imagem 1 %32

    • Remove the Screw with a Phillips #0 Screwdriver

    • The screw is attached to the rear case with washers. don't worry about losing it.

    Editar

  3. Pokewalker Button Replacement: passo 3, imagem 1 %32

    • Remove the Rear Cover from the Device

    Editar

  4. Pokewalker Button Replacement: passo 4, imagem 1 %32

    • Use the flat end of a Spudger to Remove the Battery

    Editar

    • Locate the 4 Screws Around the Device

    Editar

    • Remove all 4 screws with a Y0 Triwing Screwdriver

    Editar

    • Separate the 2 halves of the Device

    • Do not Separate Completely as the Display is Still Connected by a Ribbon Cable

    Editar

    • Use a Spudger to Flip the Latch holding the ribbon cable in place and use Tweezers to Pull it out

    • Do not use Excessive force when reinserting the cable, because ribbon cables are fragile

    Editar

    • Remove the Rubber-button thingy from the upper case

    • I have no idea what that thing is, edit this guide if you do.

    Editar

    • Remove the 3 Plastic Buttons from the Case

    • It helps that the buttons only go in one way, makes it easier to reassemble

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 2 outros contribuidores

Winni Stuart

Membro desde: 04/13/14

417 Reputação

Autoria de 2 guias

Emblemas: 10

+7 outros emblemas

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 9

Duração total: 548